skip to Main Content
ALIGN TOOL IN MAYA AND 3DS MAX

ALIGN TOOL IN MAYA AND 3DS MAX

in this article, I will show you how to align the pivot to an object and how to align the pivot to a direction of the face normals and flatten the faces on both Maya and 3DS MAX.

  • 3DS MAX

1-FLATTEN THE FACES
to planner the faces go to RIBBON go to ALIGN and click on MAKE PLANNER or go to COMMAND PANEL>EDIT GEOMETRY>MAKE PLANNER. we use make planer and make the whole selected faces flatten, and also we can force align selected faces to an axis or view or grid.

also, we use scale transform to flatten the surface by selecting the faces and change the gizmo axis to LOCAL ALIGNED then scale on the z-axis and the faces will be flattened.


2-ALIGN THE PIVOT
to change the pivot and align it to another object go to COMMAND PANEL> HIEARCHY>AFFECT PIVOT ONLY. now we using align tool to align the pivot to another object so we type CTRL+A on the keyboard and select another object, for example, I want this screw to be exactly at each side of the object so I place one screw at one side and select AFFECT PIVOT ONLY then CTRL+A to the object then I use the mirror tool to duplicate the screw and mirror the screw again on another axis .now we have 4 screws exactly at each side of the object very quickly.


  • MAYA

1-FLATTEN THE FACES
in Maya make planner tool does not exist but we can have such similar tool if we download bonus tools for Maya which you can download for free on Autodesk website after installing bonus tools it will appear next to the help tab now select the faces that you want to be flat and go to bonus tools>modeling>flatten components.

also in Maya, we use scale transform to flatten the surface so select the faces hold CTRL+SHIFT then select component and scale it at its the local axis.


2-ALIGN THE PIVOT
to change the pivot to another object hit the D key or insert to go to EDIT PIVOT MODE and shift left click another object as target and the pivot will move to that object. we can also change orientation by holding CTRL and CTRL+SHIFT to align it to the other components. we can reset the pivot by going to the TOOL SETTING>MOVE TOOOL and hit the RESET or in MODIFY tab we can CENTER THE PIVOT or BAKE PIVOT.
if the meshes are high poly and it hard to align the pivot we better move the meshes to the center of the world and align the screw pivot to the center fo the grid by holding the X key.
now we align the screw pivot point to the middle of the main object by holding the D key then hold SHIFT+RIGHT click and select MIRROR TOOL in the setting and we change the axis position to object and mirror the screw at one axis as this point, we have to delete the history so the mirror tools can work properly so hold ALT+SHIFT+D to delete the history now perform mirror tool again and change the axis to get the other 2 screws at another side of the object. if normals are fliped hold SHIFT+RIGHT click go to FACE NORMALS and REVERSE NORMALS. now finally we have 4 screws exactly at each side of the object.

cheers 😉

This Post Has 14 Comments
  1. Thanks for the sensible critique. Me & my neighbor were just preparing to do some research on this. We got a grab a book from our local library but I think I learned more from this post. I am very glad to see such wonderful information being shared freely out there. Simona Cletis Hyacinth

  2. Every weekend i used to pay a visit this site, as i want enjoyment, as this this website conations really fastidious funny stuff too.| Haily Levon Ortrude

  3. I simply could not go away your web site before suggesting that I really loved the usual info a person provide to your guests? Is gonna be again often to inspect new posts Brigit Krishna Nye

  4. I will appreciate in case you continue this in future. Lots of people will likely be benefited from your writing. Cheers!| Ertha Delaney Amargo

  5. I blog frequently and I truly thank you for your content. This great article has really peaked my interest. I will bookmark your blog and keep checking for new details about once a week. I opted in for your Feed too. Hannis Kingsly Rose

  6. Thank you for the auspicious writeup. It in fact was a amusement account it. Look advanced to far added agreeable from you! However, how can we communicate?| Flore Lucas Aubrey

  7. I think that everything published was actually very logical.
    But, consider this, what if you were to create a
    killer post title? I ain’t saying your content is not solid.,
    but what if you added something to maybe get folk’s attention? I mean ALIGN
    TOOL IN MAYA AND 3DS MAX – CG Mask is kinda boring.

    You should peek at Yahoo’s front page and see how they
    create post headlines to get people to open the links.
    You might add a video or a related pic or two to get people
    interested about what you’ve got to say.
    In my opinion, it might make your posts a little livelier.

Leave a Reply to torrent Cancel reply

Your email address will not be published. Required fields are marked *

Back To Top